OPTIONAL - Adjustable upper A arms for caster changes.
OPTIONAL- Due to the design of the KFX450R A arms by Kawasaki.....ATV Four Play would prefer to install all the internal hardware in the arms for you.

This procedure entails: Parts and Labor for installation (see front suspension diagram)

  • Upper A arms- installation of needle bearings, spacers and seals
  • Lower A arms- installation of needle bearings, circlips, joint balls and seals.
  • Does not include: lower A arm....front sleeve # 42036. Use your stock part. Installs easily


MGC SERIES A-ARMS (Maximum Ground Clearance tm)

CAD developed for the optimal shock to A arm motion ratio. These suspension components are for the serious motocross, cross country and desert racers. Whether it’s a rut, rock or a stump this design clearly has advantages over the normal conventional straight A arm and the “Gull Wing” design. Learn more about the MGC Development

These MGC series A arms for standard shock travel. The same features as our long travel MGC series A arms, but without the long travel price. Same ground clearance, same thicker walls for XC at the standard A arm price.

Standard Colors: Red, white, blue, black, yellow and orange.

Optional premium colors: Candy Red and blue. Chrome uppers

KAWASAKI PARTS AND ACCESSOrieS

KFX450R MGC SERIES LONG TRAVEL

Price: $1050.00 per pair

We believe that we have one of the best handling front ends on the market today for the new KFX450R. With many hours designing on CAD and developing different wheel bases and widths of the machine. We have certainly done our R&D on this vehicle on and off the track. We have decided that we will go to marke t with a +2" wider and +1/2" forward A arm. By doing this, it will apply more load to the light front end.... assisting in the turning  and handling. In addition we also changed the caster to what we believe to be the correct degree. However, if you prefer.... we offer an adjustable caster option as well.  Coupled with our KFX450R steering stem to reduce the "bump steer" you will clearly making the right decision on your purchase. It is the Logical Choice.

  • +2  +1/2
  • Long Travel/MGC ( Maximum Ground Clearance)
  • 4130 Chromoly Tubing
  • Professionally TIG welded
  • Sealed Ball Joints
  • Uses a 18" shock (versus a 16.16" stock length)
  • 10.7" of wheel travel (Depending on shock manufacturer)
  • Heavy Duty Chromoly Tie rods included
  • Constructed to be used with all OEM internal bearings, seals and circlips

KFX450R STANDARD TRAVEL +1/4

Price: $995.00 per pair

Applications: Kawasaki KFX450R


Features:  CAD developed for the optimal shock to A arm motion ratio. These suspension components are for the serious motocross, cross country and desert racers. Whether it’s a rut, rock or a stump this design clearly has advantages over the normal conventional straight A arm.


Notes:  The standard travel KFX450R MGC uses the stock shock or stock length after market shocks. In addition, we moved the shock mount to obtain a much plusher ride. With these altered shock mount locations these arms will give 10 1/4" of wheel travel.  These prices do not include the OEM bearings and seals.ive ride

ATV FOUR-PLAY ... it's the logical choice

SOFT BARS GEN II

Price:

Soft Bars  $385.00
Handle Bar Clamp $115.00
Antivibe Bushing Kit  $29.50

 
Our SOFT BARS use a (PDS) Progressive Dampening System. This system uses a dual rate vertical cartridge installed in the upright pivot assembly. This fully adjustable system allows for light resistance at the beginning of the travel continuing to a heavier resistance at the end of travel.  ATV Four Play’s SOFT BARS  will initially be offered in (1) style which is very similar to the CR HIGH. The sweep is at 12 degree's back.  The SOFT BARS are only suited for aftermarket ATV steering stems and certain models of OE steering stems. The SOFT BARS cannot be used on a motorcycle. The reason is we do not use the "clamp tube" that is secured to motorcycle by a handlebar clamp. SOFT BARS bolt directly to the ATV steering stem and  does not require   the "traditional" handle bar clamp arrangement or the  1 1/8" adapters.  Learn More ...

Our new website is still under construction so some prices may vary … we appreciate your patience as we work on our new look!