Honda TRX450 XC Area-51 series A arms

​​Long travel kit – MSRP $1,650.00
Standard Travel Kit – MSRP $1,290.00
 
Long travel and standard travel options available.
 
Still using our proven ATV Four Play’s Honda +1 MGC, lower XC A arm. We decided to mix things up a little for the woods racer.
We use the OEM Suzuki LTR450’s spindles, brakes and hubs on a 06’-14’ TRX450 chassis. We also added our TRX450 anti-vibe steering stem with a modified and calibrated steering flag. This modified flag will accept the OEM LTR450 tapered tie rod ends. Which stay in place better due to a taper, rather than the Honda non-tapered tie rod end. That sometimes become loose and “eggs out” the stem flag.   We also moved the flag in a different location to aid in the “bump-steer”.
A completely different approach to caster adjustment. We use a HD ½-20 chromoly rod end in the front of the upper A arm. Then we made the rear of the upper A arms with the OEM style pivot tube. Which is intended to use a spherical bearing, clips, seals and spacers. By doing this, we are capable of adjusting the caster quickly and securely by only adjusting the front rod end. Because the rear pivot uses a spherical bearing. Thus allowing adjustments ranging from -12 degrees’ to +12 degrees’ caster without any binding or seal separation.
 
The kit includes:
(2) Lower ATV Four Play, +1” Chromoly steel A arms.
(2) Adjustable ATV Four Play, +1” upper A arms.
(2) HD ½” rod ends.
(2) HD +1” female style tie rods. Tie rod ends are not included.
(1) ATV Four Play, Area-51 anti-vibe steering stem.
(1) ATV Four Play, Billet aluminum anti-vibe handle bar clamp.
(4) FRAP sealed ball joints.
 
Please note the pivot areas of this Honda product does not include the required OEM style bearings, seals, spacers and clips.

soft bars gen ii

Price:
Soft Bars  $385.00
Handle Bar Clamp $115.00
Antivibe Bushing Kit  $29.50

Our SOFT BARS use a (PDS) Progressive Dampening System. This system uses a dual rate vertical cartridge installed in the upright pivot assembly. This fully adjustable system allows for light resistance at the beginning of the travel continuing to a heavier resistance at the end of travel.  ATV Four Play’s SOFT BARS  will initially be offered in (1) style which is very similar to the CR HIGH. The sweep is at 12 degree's back.  The SOFT BARS are only suited for aftermarket ATV steering stems and certain models of OE steering stems. The SOFT BARS cannot be used on a motorcycle. The reason is we do not use the "clamp tube" that is secured to motorcycle by a handlebar clamp. SOFT BARS bolt directly to the ATV steering stem and  does not require   the "traditional" handle bar clamp arrangement or the   1/8" adapters.  Learn More ...

TRX450R SWING ARM

Price:  $875.00

Features: 

  • Constructed of 4130 Chromoly steel tubing.
  • Crushed tube design.
  • Professionally TIG welded.
  • Gusseted in the necessary locations.
  • Furnished with quality pivot bolt needle bearings.
  • Furnished with OEM CRF 450 dirt bike chain slider provisions.
  • Other colors available

Ultra Tech Series A arms

  • +2"  Standard travel
  • Professionally TIG welded
  • ATV Four Play’s signature White Delrin bushings.
  • Select model are supplied with steel pivot inserts.
  • Grease fittings
  • Preset Caster and adjustable camber
  • Strategically gusseted for optimal strength.
  • Extremely durable
  • Bright zinc coated tie rods
  • Sealed heavy duty automotive style ball joints.[*]         


For Models:

  • TRX 450R $650.00   plus 2" standard travel 
  • 400EX $650.00   plus 2" standard travel 

TRX450R STEERING STEMS

Price: TRX 450R $265.00
Handle Bar Clamp $115.00

Features:  We manufacture Anti vibration steering stems for your atv. They are all constructed with 4130 Chromoly steel tubing and professionally TIG welded. Unlike the competition we use all Chromoly steel especially the "flag" on the TRX450R. The billet aluminum bar clamps all have the standard "tether" kill switch mount incorporated into them for a clean appearance and of course with our logo engraved into the top of them. They are offered in +0" through plus 4" in 1/4" increments. Also +1/2" forward is available .CLAMPS 1 1/8" OR 7/8".  All stems are chrome plated with clamp and kill switch plate included. 

ATV Four Play’s Honda TRX450/CRF250 conversion kit

MSRP $ 574.00
This kit will allow you to install a Honda CRF250F engine into a Honda TRX450 chassis. This is a bolt in kit. Meaning that the frame will still be useable for the OEM 450 engine after the rider has outgrown the 250cc power plant.
 
This kit includes:

  • Rear engine/swing arm adapter bracket.
  • Hardened pivot sleeve for adapter bracket.
  • Front engine mounts with hardware and billet aluminum spacers.
  • Upper mounting brackets and billet spacers that secures engine to chassis.
  • (8) Necessary bolts and nuts.

TRX450R LONG TRAVEL XC +1"

Price:  $950.00 per pair

Applications: Honda TRX450R 04-08'
Features:

  • Professionally TIG welded
  • Gusseted in all necessary areas
  • Made for maximum ground clearance
  • No caster adjusting required
  • Camber adjustable
  • Delrin bushings with O rings and Plated steel bushing inserts.
  • Heavy duty ball joints

TRX450R LONG TRAVEL MX +2.5"

Price:  $950.00 per pair

Applications:  TRX450R 04'-06
Features:

  • Professionally TIG welded
  • Gusseted in all necessary areas
  • Made for maximum ground clearance
  • No caster adjusting required
  • Camber adjustable
  • Delrin bushings with O rings and Plated steel bushing inserts.
  • Heavy duty ball joints

TRX450R +1 

Price: $895.00 per pair

Applications: Honda TRX450R
Features:  CAD developed for the optimal shock to A arm motion ratio. These suspension components are for the serious motocross, cross country and desert racers. Whether it’s a rut, rock or a stump this design clearly has advantages over the normal conventional straight A arm and the “Gull Wing” design.

MGC GEN II TRX450R


Price: $ 1,150.00
Features:  CAD developed for the optimal shock to A arm motion ratio. These suspension components are for the serious motocross, cross country and desert racers. Whether it’s a rut, rock or a stump this design clearly has advantages over the normal conventional straight A arm and the “Gull Wing” design.

The MGC GEN II TRX450R arms must be used in conjunction with our Gen. II steering stem and TRX450R 2005 spindles. They are calibrated to work together for optimum performance.

MGC series A arms ... Area 51 TRX/LTR 450 MGC series A arms

Price: $ 1,650.00

With extensive testing and design. We have found that by using the Suzuki LTR450R steering and braking components, the Honda TRX450R can now handle even better than before.  We have designed a Long Travel, Maximum Ground clearance A arm that uses the LTR450R spindle, brakes and hub components. We also use a similar design of the LTR steering stem “flag”. With this newest technology, the TRX450R will handle the most roughest terrain, faster cornering, off camber jumps, quicker turning, less bump steer and a much more predictable ride.  We have tested and tuned these components with some off the fastest, championship winning Pro Am and A riders in the United States. Collectively, we feel we have the best handling, practical and most economical front end on the market today.

HOnDA PARTS AND ACCESSORIES 

ATV FOUR-PLAY ... it's the logical choice

Our new website is still under construction so some prices may vary … we appreciate your patience as we work on our new look!