ATV Four-Play Factory Racing

HOME

NEW PRODUCTS

PRODUCTS

ATV RACING

ABOUT US

DEALER INFO

CONTACT US

APEX Mini Quad products by ATV FOUR-PLAY
APEX Mini Quad products by ATV FOUR-PLAY
ATV Four Play’s SOFT BARS  

ATV Four Play’s SOFT BARS are offered in

(4) four different variations

 specific to mini quad/youth riders needs.

                     

 
 
Click on image to take a closer look 
 
ATV Four Play APEX Anti-Vibe Steering Stem 
$ 250.00 MSRP
Billet Clamp sold separately $100.00
 
Our steering stem replaces the stock one for a very important reason: When using our Long Travel Apex MGC series A arms. You will gain a significant amount of wheel travel over stock. If you do not change the steering stem. Over a short time, your stock "flag " will break. This is due to more wheel travel which adds a down ward binding on the tie rod and flag area. The stock "flag" is flat in design. Where ours is formed at a angle to allow more travel and less binding. Imagine a 12" tube connected to a thin steel plate. If you pull down on it several times, It will fail.
 
  • Constructed of 4130 Chromoly tubing
  • Formed steel "flag" to achieve more wheel travel.
  • Professionally TIG welded.
  • CNC made stem bottoms.
  • Race tested and prov en.
  • ATV Four Play Soft Bars bolt directly to this stem.
 
Apex swing arm from ATV Four Play
Apex swing arm from ATV Four Play
ATV Four Play APEX LT Swing Arm
MSRP $ 600.00
 
This new edition Apex swing arm from ATV Four Play uses the stock Apex bearing carrier and brake plate. Which now reduces the replacement cost from our other model. Keep in mind that our other Apex swing arm includes our bearing carrier and brake plate that will accept a 300EX HD axle or the Apex axle.
 
Constructed from 4130 chromoly steel tubing Professionally TIG welded
Includes pivot tube grease fitting, pivot bushings and chain tensioner provisions. Powder coat colors include: Gloss black, textured black, orange, yellow, blue, red, green and hot pink

Click on the images to take a closer look!
 
APEX LT MGC Series A arm

APEX LT MGC Series A arm

MSRP $895.00

- +1" per side

- 4130 chromoly steel tubing

- Caster and camber adjustable

- Professionally TIG welded

- Replaceable HD ball joints

- Uses a 14.5" shock

- 9" of wheel travel

- Must be used with our steering stem to prevent tierods end binding.

Click on the image to take a closer look!

 
APEX Round House Swing Arm

APEX Round House Swing Arm

 

- 4130 chromoly steel tubing

- Uses a 300EX bearing carrier with an adapter to use a APEX axle.

- Includes aluminum brake caliper plate

- Uses a 400EX chain slide

- Comes complete with pivot bolt bushings

- Has a tab to use a chain tensioner

- Offered in Red, Blue, Black, Silver, Orange, Yellow and white.

- Custom colors available at an additional cost.

                                  

MSRP $ 895.00

Click on the image to take a closer look!

 

Contact Information

Telephone: 330-289-1423

FAX:  330-334-6589

Wadsworth OH

E-mail: tom@atvfourplay.com

Copyright © 2007 ATV Four Play LLC

www.motocrosswebdesign.com

mxwebdesign@yahoo.com